Difference between Turret Lathe and Capstan Lathe: TURRET LATHE : CAPSTAN LATHE: 1. Turret is mounted on the saddle which slides directly on the bed. 2.In this cutting tool can move complete length of the bed and can machine longer work piece. 3.It gives high rigidity to the tool support by placing the saddle directly on …
Specifications of Lathe Machine. Specification of lathe depends upon the measurements of lathe machine. 1) Distance between the head stock and the tail stock is used to find the length of work done the lathe machine. and we can use required length of work piece on the machine. 2) To work on the lathe machine …
Cutting Tool Requirements: The cutting tool must have the following Requirements for long tool life. 1. Hot Hardness: The cutting tool has the ability to attain its hardness at higher temperature .the cutting tool should able to withstand high temperature. 2. TOUGHNESS: Cutting tool has the ability to resist shock, vibrations occur while cutting operation, by this …
BUILT UP EDGE: It is formed during the cutting process, continuous chip formation of metal, and cause welding up of metal chip to the cutting edge. This welded metal on the work piece is known as built up edge, by this formation the cutting tip changes to cutting edge. Points for formation of built up …
Single Point Cutting Tool geometry: Thee are various type of principle angles in single point cutting tool they are as follows: 1. Clearance angle: It is the angle between the plane perpendicular to the base of the tool and portion of the flank adjusted to its base. They are two types in Clearance angle they …